CART: (0) items
NEED HELP?Call9702041930
Phone Center Hrs: Mon-Fri 6:00AM - 4:00PM MST
OTC 6525 LeakMaster Evaporative Emissions System Tester

OTC 6525 LeakMaster Evaporative Emissions System Tester

Part Number:OTC6525


OTC Tools
OTC 6525 LeakMaster Evaporative Emissions System Tester.

LeakMaster’s simple two-step process makes testing today’s most advanced OBD-II systems quick and easy. You simply connect the unit to the vehicle’s EVAP service port and battery. The OTC
LeakMaster 6525 can be calibrated to identify leaks at .020 and .040 (thousandths of an inch). There is a feature setting on the control valve making it capable of detecting leaks much smaller than .020, allowing the unit to keep pace with testing standards as they change. The OTC LeakMaster 6525 indicates, with a Pass/Fail, if the system being tested has unacceptable leakage. There’s no more guesswork.
With LeakMaster, when you see the smoke, you’ve found the leak! If the OTC LeakMaster 6525 confirms the existence of excessive leakage in the system, simply switch the unit into phase-two testing, which introduces non-toxic diagnostic smoke with UltraTraceUV™ technology. Locating the area of any leak is simple, just look for the smoke exiting at the point of leakage. The UltraTraceUV dye will help you pinpoint the exact point of any leak during and after testing. It’s that simple! LeakMaster offers state-of-the-art control for troubleshooting state-of-the-art systems. The OTC LeakMaster 6525 precisely controls critical pressure and flow rates needed for testing today’s advanced OBD-II EVAP systems. The OTC LeakMaster 6525’s diagnostic smoke and UV dye have undergone extensive testing by major auto manufacturers, is approved for use in OBD-II EVAP systems, and meets the most stringent OEM requirements.
A truly versatile unit for testing a wide range of systems. The OTC LeakMaster 6525 is designed to work with either nitrogen or shop air. In addition to its EVAP capabilities, the OTC LeakMaster 6525 also locates wind and water leaks, vacuum/induction leaks, climate control vacuum leaks, exhaust leaks, and many other closed system leaks. And, all testing is safely performed with the engine off.
Inexpensive to operate, the OTC LeakMaster 6525 is
user-refillable and will complete about 1,000 tests per smoke solution refill.
LeakMaster’s precision and accuracy help you keep pace with standards for years to come. The OTC LeakMaster 6525’s precision and accuracy in detecting OBD-II EVAP leaks gives the unit the ability to keep pace with testing standards as they evolve, making it the right solution for EVAP system testing for years to come.

No. 6525 OTC LeakMaster Specifications:

Height 23 in. (58.4 cm)
Width 18 in. (45.7 cm)
Depth 9-1/2 in. (24.1 cm)
Weight 17 lb. (7.6 kg)
Ship Weight 20 lb. (9.0 kg)
Power Supply 12-volt DC
Amperage Usage 15 amps
Supply Pressure 13.0 in. H20
Supply Volume 15 liters per minute
Operating Temp. Range 45º F to 140º F (7.2º C to 60º C)
Smoke Supply Line 12 feet (3.6 m)
Power Supply Line 12 feet (3.6 m)
Remote Starter Cable 12 feet (3.6 m)

Accessories: (Included with 6525; also available separately):
CEA-01 3-1/2" Diameter Exhaust Cone (Qty. 2)
CEA-02 Assorted Cap Plug Kit
CEA-03 Smoke Diffuser Adapter
HS-400AC 400,000 CP Spotlight with 20 ft. Cord and Battery Clips
CEA-04 Standard SVC Port Adapter
CEA-041 25 ft. Nitrogen Coiled Hose
CEA-042 Small SVC Port Adapter
CEA-049 Double Ended Schrader Remover Tool
SR00 Water Trap Filter.

Reward Points

VIP Members earn 39 points when you buy this item. For VIP Membership info click here

Related Items

Recently Viewed Items

Browse By Category
Browse By Price
New Releases
Top Sellers