Klann Tools KL-0369-45 K Injector nozzle Tool Set CDI
Suitable for Mercedes CDI engines OM 611, 612, 613, 628, 646*, 647, 648 etc. (*not suitable for OM 646 EVO)
The injector nozzle tool set KL-0369-45 K (consisting of injector nozzle puller KL-0369-41, injector nozzle puller KL-0369-45, cleaning tool KL-0369-20 A, compressed-air adaptor KL-0369-55 A, thread tap KL-0369-51, and plastic storage case KL-0369-4590) enables the professional removal of injector nozzles.
The injector nozzle puller with slide hammer KL-0369-41 is designed for the removal of tightly fitting injection nozzles without having to dismantle them. The injector nozzle puller with pull spindle KL-0369-45 enables the removal of very tight-fitting injector nozzles directly on the vehicle. It is not necessary to remove the cylinder head from the vehicle using either of the pullers. The cleaning tool KL-0369-20 A allows the injection nozzle mounting hole, the nozzle seat, and the small aperture leading to the combustion chamber to be cleaned in a single operation. Screwing in the compressed-air adaptor KL-0369-55 A into the glow plug bore and injecting air into the combustion chamber prevents impurities from entering the combustion chamber.
The thread tap with drill bit KL-0369-51 is designed for rethreading and cleaning the tapped hole for the nozzle holder. This procedure is important before the installation of the injector nozzle.
Note: For Mercedes A-class CDI (OM668), two injector nozzles are always held by a single retaining clip, so that if an injector nozzle has to be removed, the 2nd nozzle must be pulled out in parallel with it. For this to work, the KL-0369-46 K injector nozzle puller is needed.
Drop ship from manufacturer. Email
for product availability.