Coats 4050A Center Post Tire Changer
| Product #: |
COA4050A
 |
Average Review: 
(Review this product!)
|
| Description: |
Coats 4050A Center Post Tire Changer.
The COATS Model 4050A Center Post Tire Changer is super fast and super powerful. All operations--bead loosening, demounting, mounting, and inflation--are performed in the same position.
The contoured tabletop provides proper rim support, and a 7.5 gallon surge tank is 50 percent larger than competitive models for the inflation power when you need it.
The 4050A set the industry standard for high-volume tire changing. And for some shops, it's still the machine of choice.
Other features:
• Fast one-position operation takes half the steps.
• Returns the tool to same position on the wheel after each cycle.
• Tall positioning pin eliminates adapters for front wheel drive, high offset wheels.
•Two-position detent mechanism limits travel of lower bead loosening shoe on narrow rims.
• Large Internal Surge Tank.
Specifications:
Rim Diameter 10" x 17.5;
Rim Width 19" Maximum;
Tire Diameter 38" Max Outside;
Type of Drive System Air Only;
Required Air Source 110 to 175 PSI, 2HP Compressor, 5 SCFM min. at 150 PSI;
Chassis Footprint 53"W x 17.5"D x 42" H;
Shipping Weight 575 Lbs.;
Operation One Wheel Positions
1st-Loosen Bead/Mount & demount in the same Position;
Wheels Handled Alloy Using Optional Access. & Steel;
Mount/Demount Mechanism Separate Cone Mounts On Center Post;
Tool Head Offset N/A;
Shape Of Tabletop Contoured
for Perimeter Support of the Wheel;
Wheel Clamping Method Centering Cone Mounts On Center Post;
Height of Table From Floor 28.5";
Bead Loosening System Foot Control Actuates 7" and 5"
Auxiliary Cylinder That Loosens Both Simultaneously
On Wheels up to 19" Wide;
Drive System Options: Air Drive Powered by Dual Chrome
Plated Air Cylinders;
Pressure Limiter Standard;
Bead Seating Reservoir Located at an Internal ASME Tank With a 7.5 Gal. Capacity;
Position of Inflation Gauge Permanently Mounted in Upper Tower;
Inflation Gauge Easily Calibrated 0 to 60 PSI Gauge
w/Damage Resistant Lexan Faceplate;
Air Supply Gauge (CAL OSHA) 0 to 300 PSI;
Water Filter None;
Oil/Lubricator None;
Storage Tray Standard;
Inflation Guard System None;
Nylon Demount Head Optional.
Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight.
|
| Price: |
Call for Price and Availability |
| Resources: |
Link(s):
Hennessy Industries
|
|
Email this page to a friend
Price: Call for Price and Availability
 This item cannot ship via UPS
and must ship via LTL truck freight. |
