Norco 82302B 1/2 Ton Capacity High Lift Wheel Dolly.
1/2 ton capacity high lift wheel dolly is designed for the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.
Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern.
7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum.
A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle.
A hydraulic jack tilts the lift arms in order to match the angle of the spindle.
Safety chain provided to secure tires and wheels to the dolly.
Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.
Capacity 1/2 ton.
Lift Height low 3" and high 41-1/4".
Lift Arms width 24-1/4", length 21", tilt angle -2 to +30 degrees.
Side to Side Adjustment, left 3-1/4", right 4-1/4".
Overall Length 45-3/4", Width 43-3/4", Height 62".
Support Leg Clearance 6-1/4".
Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. Please call 970-204-1930 for shipping estimate.