| Description |
Klann Tools
Klann Tools KL-0055 Audi A6 Tool Set for Klann KL-0255 Strut Vise
Suitable for Audi A6 (04/04 onwards) front axle.
The additional tool set, when used with the clamping and adjusting fixture KL-0255, makes clean, quick adjustment of the spring plate possible in relation to the retaining lug of the shock absorber strut.
With the adjusting gauge, the precise amount of offset between the lower shock absorber strut mounting and the upper spring plate can be adjusted correctly.
Note for VW and Audi vehicles:
The front spring/shock absorber struts on VW-Audi vehicles must be pre-adjusted on the workbench, so that the upper mounting point (the spring plate) and the lower shock absorber strut mounting (fork/shock absorber lug) are correctly aligned with one another.
Unless this work is undertaken first, the shock absorber strut cannot be installed, because the fastening points between the shock absorber strut and the body/axle beam will not be aligned.
If the shock absorber strut mounting is forced into the correct position, the O-rings for level control will be damaged and the shock absorber strut will be distorted, which could lead to drumming noise and cause the vehicle to handle incorrectly.
Availability: Drop ship from factory. Usually ships within 2-3 days. Ships via UPS. |
|
