Kent-Moore J-45766 Remover, Side Bearing
For General Motors. The differential side bearing cones are mounted on the adjuster nuts instead of the differential case trunions on 9.25" HDCS front axles, and must be removed for pinion shim selection. J-45766 removes the side bearing cone without damage, so the cone can be re-installed after the required pinion shim is determined. Both halves of J-45766 are fastened around the bearing cone. Previously Essential J-8433 Puller is attached to J-45766 using the bolts supplied with J-45766. The forcing screw from J-8433 is tightened against J-36597 Pilot Washer, which is placed in the bore of the adjuster nut, and will draw the bearing off the adjuster. Unapproved methods will damage the bearing.Email
for product availability.
Handsontools® is your one source for auto mechanic and body shop tools, shop equipment, industrial tools and shop supplies. Specialists in vehicle specific mechanic tools, shop tools, industrial tools and shop equipment.