Kent-Moore J-43298 Ignition Module Tester
For General Motors. 2000 OLDSMOBILE W-CARE (INTRIGUE) WITH 3.5L PREMIUM V-6 ENGINE. The PCM causes a spark by pulsing the IC circuit, signaling the IC module to coil and fire the spark plug. The type of IC PCM driver/circuit failure will be determined by EST codes, P1351 (high) - P1366 (low). An open-circuit on the input side of the PCM driver will also set the EST code, however, an open on the output side will not. J-43298 Tester is used to check the output of the IC drivers at the IC module output connection. The IC module is designed to see certain voltage drop requirements across the output driver circuits when checking for a signal. A conventional test lamp may cause IC driver failure due to a wide variation of resistance's available. J-43298 allows a controlled current to flow through the driver circuit, which is realistic to the actual function of the IC module. The IC module must be removed from the cassette to connect the tool to the output side. Crank engine to check that all LED's are flashing.Email
for product availability.