Kent-Moore EN-49245 Injector Seal Installer / Sizer
The Hitachi SIDI system used on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has 2 seals in the injector tip. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head. There are two seal installation pilots included in EN-49245 (one for each groove) which allow the seal to slide onto the injector tip without catching on any machined surface, or the incorrect groove. EN-49245 also includes a seal installer to drive the seal over the pilot and into the groove, and a sizer to compress each seal into its groove and ensure its size prior to installation. EN-49245 must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation. Email
for product availability.