| Description |
Kent-Moore Tools
Kent-Moore DT-47825-100 Plate, Control Solenoid Test
For GM / General Motors. This test adapter plate and pressure gauge attach to the Control Solenoid Valve Body Assembly and allow air to be charged into the solenoid ports. The DT-47825-20 Adapter Harness is connected to the transmission electrical harness and to the Control Solenoid connector. The Tech 2 is then used to systematically actuate each solenoid and check for a pressure reading on the gauge to determine if all solenoids are functioning correctly. Previously essential for 6L80 transmission.
Email for availability. |
|
