| Description |
Kent-Moore Tools
Kent-Moore CH-48107 Replacer, Bushing
For GM / General Motors. Conventional tool are unable to remove and install the front suspension lower control arm bushing. CH-48107 is installed over the bushing flange and, when used with J-02619-A, quickly and easily removes the outboard half of the bushing. Once removed, J-5590 is used to drive the inboard half of the bushing out. CH-48107 is then used along with a typical bench vise to install both halves of the bushing into the control arm simultaneously. Attempts to replace the lower control arm bushing without CH-48107 could result in increased labor time and/or component damage.
Email for availability. |
|
